Chapter 165 The Director of the Steel Rolling Mill Has some Problems
Damn it, Luo Cheng felt that he was absolutely crazy, the engine was really untouchable.
Luo Cheng was in the room at this time, wearing a military coat, drawing and writing on a drawing on the desk he bought that was missing a few drawers, while trying to understand it.
Next to the desk, there is a fuel supply structure diagram of a low-level four-cylinder gasoline engine. It not only has pictures but also text standards.
As a car repair major, Luo Cheng can easily understand the meaning of each accessory, such as the ignition switch and how the fuel tank is filled. However, just one gasoline goes through more than a dozen small parts from entering to igniting. Which repairman can know this? Come learn this.
What oil pressure regulator, fuel distributor, fuel filter, oxygen sensor, ignition coil, fuel injector, spark plug~~~all the way to the ignition switch.
To put it simply, the process of igniting a ignition and burning gasoline will be nothing more than turning the car key in future generations. But in the engine, it has to go through oil supply, air supply, and then combine the two, and then control it through the ignition switch.
Just from this most basic structure, Luo Cheng knew how to supply oil, how to supply air, and how to match the two together.
Fortunately, Luo Cheng at least still knows and understands these words. If he is not exposed to these things, he might not understand what a fuel injector does.
When he was studying in the past, Luo Cheng was very partial to subjects and disliked memorizing things. But now he has to memorize the road map. Otherwise, if he brings a drawing tomorrow, how can he prove that he designed it himself? This is still a low-level design structure circuit diagram, but he feels that even the lowest level can surpass the current engine performance.
At least if it involves turbocharging technology, the current machine diagram not only includes circuit diagrams, but also accessory style diagrams. But for this little thing, Luo Cheng has already drawn several distribution maps. There are only dozens of parts. A low-level engine has thousands of small parts.
Now Luo Cheng feels that not only his own people have joined in, but the system's sign-in in the short term will also have to be used for this. He can only pray that he will not sign in to the same organizational chart again. But as long as you understand the low-level organizational diagram, it will be easy to understand the intermediate and advanced levels in the future. It's just that with the current industrial level, the lathes and precision instruments produced may not be up to standard. Even if you know how to make them, you may not be able to make them.
Staying up until late at night, Luo Cheng, who had long been accustomed to going to bed early, saw a fight in his eyes~~The hegemony was not yet achieved~~It was not yet achieved. I have gone through the circuit structure diagram in my mind several times and will review it again tomorrow morning.
I will go to the factory tomorrow and let Jiang organize a clear path. Why is he a level 8 engineer while he is a level 7 engineer? He is not capable enough to reach Level 7, but he only passed Level 7.
Having a system is equivalent to a gentleman hiding his weapon in his body, ready to move when the time comes.
Tomorrow I will be in the face of a flying dragon. There is no way I can lose the bet with Team Leader Jiang. They obediently did the errands for me and moved the engine from the drawings to reality.
The next day, Luo Cheng got up early and looked at the organization map on both sides. Looking at the color drawings taken out of the system, I can't let anyone discover this thing. When I get to the factory, I will make a copy of my hand-drawn drawings. I will hide this drawing first and burn it when I get back in the evening.
Luo Cheng has already thought about the arrangements for today's formation. Even if he wants to make an engine, it would be pretty good if he can produce the first engine within a month. Then if you want to mass produce, you have to invest a lot of money and buy a lot of processing equipment. You must know that just one engine can actually build a large factory.
In the short term, don’t expect the cube car to make any money. But the workers in the factory can't just sit idle like this. The most important thing is that the human resources department has been asked to notify the street office to recruit temporary workers. Another group of people will come to the factory in a few days.
So Luo Cheng planned to buy a diesel engine and build a three-wheeled vehicle the same size as a small truck. Many people must have seen the kind of cars parked on the side of the road specifically for people to repair leaks, or the kind of cars that sell twists and turns. These are diesel cars like this.
The rear body racks of Jiefang trucks are now made of wood and painted green. Luo Cheng can definitely do that, and the three-wheeled truck is easy to drive and can pull people and goods. The body is definitely longer than the cube truck, but it has one less wheel, there is no need for a power steering pump, and there are actually fewer bearings.
In addition, diesel engines are cheaper than gasoline engines, so the longer the model, the more expensive it is. But the model is large and can attract goods. Luo Cheng is not willing to sell it cheaply. He might as well sell it for 5,000 when the time comes.
When arriving at the automobile manufacturing plant, Luo Cheng first went to the team office and handed over a dozen structural drawings he had drawn to Team Leader Jiang. The white paper on which the drawings were drawn was not large, and it was not a formal drawing, so I drew about ten drawings, but in fact there were not many. From now on, we will definitely need to use large drawings frequently, so we have to ask the logistics department to buy some.
Let Team Leader Jiang and the others look at it first. If there is anything they don't understand, they can explain it to them after Luo Cheng comes back from his work. Have them draw it too, so they can keep a backup.
I saw Director Zhang's car at the entrance of the corridor, which meant that he had gone to work in Changli. Luo Cheng found him in the logistics office. Ask him to buy ten diesel engines. The size and model should be similar to the last gasoline engine. A diesel engine of this size would definitely have less horsepower than a gasoline engine, but that didn't matter to Luo Cheng. Isn't it normal for a three-wheeled car to run slower than a four-wheeled car?
After explaining everything, Luo Cheng took a manual forklift, put it on the truck and ran away. Without the raw materials, he couldn't do anything. The steel material for the square car has also been ordered, and we have to wait for the steel rolling mill to deliver it.
When we came to the steel rolling mill, there was still a lot of construction inside the mill. Once again, again, Luo Cheng finally found Director Chen from last time. Director Chen had seen a forklift before. When Luo Cheng took out the manual forklift, he said that it looked a bit like the forklift on the forklift.
Luo Cheng told Director Chen that this thing was a manual forklift. And showed him how to use it. Of course, the manual forklift would not be effective without the pallet. But here is a steel rolling mill, with steel, cutting, and advanced welders. There is no problem in temporarily making a steel pallet.
Director Chen didn't know whether he was interested in Luo Cheng's words or Luo Cheng. No matter what Luo Cheng said, he always nodded with a smile. After explaining to him, Luo Cheng was afraid that he wouldn't believe it, so he asked him to find someone to make the tray, and he actually ordered it immediately. The requirements for the pallet are simple. It just needs to be higher than the forklift when it is lowered. The length of the chassis should not exceed its forklift.
In fact, Luo Cheng didn't mention the requirements, but Director Chen also understood that a non-manual forklift also requires a pallet to fork things.
"Director Luo, if you can build this manual forklift, do you have the ability to build a motorized forklift?"
Hearing Director Chen's inquiry, Luo Cheng felt happy, yo, not bad, this steel rolling mill should be a big customer of forklifts.
I don’t know if Director Chen understands the principles of forklifts. If he does, that’s fine. If he doesn’t, that’s even better. If he doesn’t, just blame him. But for some reason, Luo Cheng felt like he couldn't figure out the other person's background. Whatever he told him, he always had a smile on his face.
I am bragging about hydraulic lift forklifts. This is the only technology available abroad, and China is still importing forklifts with backward technology from abroad. Even the forklifts that are imitated in China are just a drop in the bucket. The production capacity of a few forklifts a month is just a handful.
But when I think about myself, it seems that if I want to produce a forklift, I can only rely on manual work. You must know that a forklift must stably lift a ton of goods, and the body must be at least one ton, otherwise it will be useless no matter how strong the lift is, the forklift frame It may not be able to press it down, but it can lift your body.
When Luo Cheng was bragging, a worker from another company had already made the iron pallet frame. This efficiency, if it were not for mechanized production in the future, the labor efficiency of future generations would really be incomparable with this era.
With the pallet in hand, Luo Cheng showed Director Chen the difference between this handmade forklift and an ordinary trolley. This pallet can be used to place goods. As long as there are many pallets, the goods on the pallet do not need to be manually placed on the cart when moving. You can directly use a forklift to put a fork under the pallet, and then use the principle of a hydraulic jack. Lifting the pallet is equivalent to lifting the goods. This saves so much effort and labor.
Director Chen smiled and nodded, without talking nonsense to Luo Cheng, and directly asked Luo Cheng how much he could produce. There is also this pallet. I asked Luo Cheng if he could process it. Their steel rolling mill is currently short of manpower and they can produce steel plates.
This~~ will let Luo Cheng do what he should do. If in future generations, Luo Cheng would be able to meet several bosses like Director Chen when doing business, he would not be able to make a fortune.
But I want this thing, and the price hasn’t been discussed yet~~Yes, Director Chen is always smiling. Although he gives people a very friendly feeling, he said that he wants it without even discussing the price. This feeling is not spiritual. There's something wrong.
Luo Cheng actually thought about the price on the way. Steel is expensive now, and all small parts are polished manually on machines. Coupled with my own hydraulic technology, even if there is no middleman to make the difference, one unit will still cost two hundred.
"Director Chen, I haven't said the price yet. The technical content of my manual forklift is not low. This forklift costs two hundred yuan."
"Okay, reasonable."
~~~Luo Cheng told the price, Director Chen still smiled and nodded and agreed.
That's okay~~, one or two good bicycles only cost about 150 to 180. This is because they produce imported tires and sell them so expensively. I don’t have anything imported here. Anyway, I have to buy a large amount of steel here. Then the accounts will be offset by each other. Anyway, the accounts are business-to-business. If you dare to buy it, I won’t dare to sell it.
At the automobile manufacturing plant, Luo Baotian and his team were preparing to follow the automobile factory's accountant to the livestock factory to get pigs. Moreover, Luo Cheng's mother and sister-in-law stayed at the car factory and did not follow them. Qin Ru knew how to get to Luo Cheng's house. But she never expected that her eldest brother Luo Cheng was just the leader of some group last time, but this time he was directly the director of the factory.
And now there are many young men at the door, all of them young, waiting for notification. They were recommended by the subdistrict office to participate in the interview for temporary workers.
According to Director Zhang, these little bastards need to be dryed out first. They need to register with the human resources department and then take them to the workshop. If they like them, they will stay. If they don't, they will be let go.
But they usually stay. After all, they are recommended by the street office, and it depends on who is clever enough to be favored by the master in the repair shop. At least the temporary workers can become apprentices as soon as possible. The salary can be increased a lot.