One Thousand Seven Hundred and Fifty-Nine Nothing Wrong

Opened a new book: The End of the World: My House Can Be Upgraded, Brothers Help Collect, Give Some Recommendations!

*******************

Just when Xinghuo Technology was in the rapid expansion of the flagship, the representative of the bigwig in the aviation industry came.

After they came, the first thing they asked was to visit the factory, and then learn about the machine tools of Xinghuo Technology.

To be honest, although Xinghuo Technology has been spread among state-owned enterprises and central enterprises, it has been miraculous, but for a large enterprise such as COMAC.

Xinghuo Technology is still quite mysterious, only hear its name but not its reality, and they dare not place an order as soon as they come up.

But at the same time, I also have complaints about Spark Technology!

Why are there complaints? It's very simple!

What kind of company is COMAC?

You said that Boss Tie is the first brother of a domestic central enterprise. We do not deny this, but our COMAC is not bad, right?

Why did you go to companies like Tie Boss and FAW and Weichai when you worshiped the mountain gate?

But we COMAC, why don't you come?

Why can't we, COMAC, get into your eyes?

A small private enterprise like yours is too awesome!

There is no way, after all, I am used to being licked by many private companies, and I am not used to such a big guy in the aviation industry when I happen to meet such a non-licker.

In the past, they were in the industrial circle, but they were always high-ranking and arrogant models.

Wherever you go, you must not be surrounded by local private companies and stars.

Who put their status there!

And as we all know, because of their special identities and their location in Shanghai, they are very rich.

On the one hand, there are many allocations from the state, and on the other hand, there are also many subsidies from local governments.

Therefore, this company is well-known in the industry as a company that is not bad for money.

Just showing a little order through the cracks of your fingers is enough for those private enterprises to eat their brains full of fat.

But this Xinghuo Technology, you say you are a machine tool, but you just don't come to visit us.

What do you mean? You are too proud!

Everyone, don’t think this is an exaggeration. In fact, many domestic companies with monopoly positions are really like this.

Sometimes, you have nothing to do with them, but you will offend them invisibly.

There is no other reason, that is, the author has no intention, but it smells intentional.

Maybe your unintentional move will make them feel uncomfortable, even very uncomfortable.

Especially, some people who already have ulterior motives towards you.

And this temptation from a bigwig in the aviation industry really made Xia Hongtao dumbfounded.

However, he quickly adjusted his emotions. As a well-rounded leader, he didn't know how many times he had experienced such occasions.

Moreover, various state-owned enterprises and state-owned enterprises have received more receptions, and he has become more aware of the temperament of the leaders of these enterprises.

"Hey, hello,

You have wronged us! "

"We, Spark Technology, have not been established for a long time. Some time ago, we didn't go to the capital to participate in an exhibition."

"Then I received a lot of orders, and I have been busy expanding production capacity since then. I really don't have time to visit the old-timers in the industry!"

Although there is a smile on his face, Xia Hongtao's heart is in MMP.

Matt, what the hell!

Still going to visit you, are you a fool?

If you don't bear the name of SF, you guys are considered eggs?

Said to be the predecessors of the manufacturing industry, but what have you created?

If you look back at the production line in your factory, is there any equipment produced by yourself?

Relying entirely on imports, how dare you say that you are a senior in the manufacturing industry?

Of course, these words can only be slandered in the stomach, and must not be said in the open.

The representative of SF who came to visit felt even more uncomfortable after hearing this.

Good guy, I just said that I went to the capital to participate in the exhibition. I'm afraid it's not a label, but I want to use the capital's boss to suppress us, right?

It is true that SF has a high status, but it really does not dare to challenge the big bosses in the capital.

So he really had to bear with this tone.

Furthermore, there is nothing wrong with what they said.

People are busy expanding production capacity, how can they have the time to visit you, some industry leader.

And you didn't invite bids before, and you didn't have a fair, so why did people visit you?

Forget it, don't care about this aspect.

After all, to say so is actually just hitting the other party.

Let's get to the point, let's take a look at the equipment first!

Long before coming here, SF has already sent a consultation letter to Spark Technology, and has actually communicated many times.

At the very beginning, SF also heard people say that there was a machine tool factory in Bincheng, which could produce relatively high-end machine tools.

Some machine tools can just solve their problems in aircraft manufacturing.

But at the beginning, they didn't take it seriously, especially when they knew that Xinghuo Technology was an unknown start-up company.

After all, there are too many liars these days, so they didn't take it seriously.

But later, as more and more brothers from state-owned enterprises got machine tools from this company, they started upgrading their technology one after another.

SF's machine is a bit restless, but they still don't believe that this company can produce machine tools for manufacturing aircraft.

After all, the machine tools used to manufacture aircraft parts are quite different from ordinary machine tools.

This kind of machine tool can be said to be the manufacturing machine of the crown of industry. In the eyes of SF, it can only be manufactured by machine tool factories in Germany, the United States, Switzerland, Spain and Italy.

Even Japanese machine tool factories, that won't work.

But you said the machine tool factory in Bincheng? Ha ha, forget it.

But later, several fighter planes of the military suddenly began to explode.

Especially the Y20, which had been stuck in the neck before, suddenly exploded several times.

Then, more than 20 consecutive days of transition test flights were carried out in the plateau area of ​​western my country.

This incident even made the central news.

As the leader of the civil aircraft manufacturing industry, SF can no longer sit still.

The performance of an aircraft depends on whether the plateau test works or not!

Several of their 919 prototypes have also been tested on the plateau, but the performance is really...

The reason is simple, because the engine of the plane is made up of patchwork.

The Y20, which was also developed by the military, is actually similar to 919 in terms of content.

The only difference is that the aviation engine of the 919 was imported from Pratt & Whitney, while the aviation engine of the Y20 was developed by itself.

And SF has been keeping an eye on the military's research progress, because they really can't handle aviation development themselves!

Although the above gave a lot of money, but they were helplessly trapped by finishing, machine tools and other reasons, they really couldn't handle it!

They even thought that when the military's Y20 was finished, they would directly use their aviation engines.

The Y20 has already had a prototype before, but it has not been mass-produced.

The main reason is naturally also related to Hangfa. Although it is available, the quality is not good!

But this time is different. It is said that the Y20 uses a brand new engine, and its performance is 20% higher than that of the previous design.

It is said that there has been a major breakthrough in finishing...

Now SF had no choice but to believe it, because they also got news from other sources that the reason why the military was able to break through was because of the use of Xinghuo Technology's machine tools.

Then came their visitation trip.

But before coming, their engineers had already communicated with the engineers of Spark Technology many times on the Internet and on the phone.

So the people who came this time were not only the leaders who led the team, but also a team of engineers.

When these people were led into the factory building, they saw the processing robot originally developed by Xinghuo Technology for the military.

When an iron pipe was really drilled into a special-demand oil pipe, the team immediately boiled.

We must know that these pipelines used to be one of the most troublesome problems for us.

When you look at the pictures of Hangfa on the Internet, the most intuitive impression is that you will see rows of iron pipes outside the entire Hangfa.

These iron pipes seem to be arranged neatly, but in fact they have different functions.

Some are oil pipelines, which are specially used to transport aviation kerosene into the combustion chamber.

Some are lubricating oil pipes, some are coolant pipes, some are exhaust pipes, and so on.

But no matter what the function is, they all have a characteristic, that is, they must withstand high pressure, high temperature, and high corrosion.

Therefore, a small pipe may often work under a dozen or even dozens of atmospheric pressure conditions.

At this time, it is time to examine your material science and processing technology.

We have overcome the material, but we still have no good way to process it.

Because the eagle sauce and Maoxiong used integrated tubes in the air hair.

To put it bluntly, it is a tube drilled out of a whole iron rod!

This is quite difficult.

Some people may say, why not use the lost wax method to cast pipes.

This is not easy, because the strength of the cast pipe is not enough! And also prone to trachoma.

Such pipes have extremely high hidden dangers and are not suitable for use in aviation development at all.

Therefore, the best pipes are all drilled out of forged special steel.

This requires the use of a high-precision honing machine, because this thing is dedicated to drilling!

But such a high-precision honing machine, we can't get it at all. It's made in Gehring, Germany. Everyone knows it is good, but if you can't buy it, can't you just stare blankly?

So we can only use the old way to drill with ordinary machine tools.

In this way, the good product rate of others is 90%, but your good product rate is 20%, you can calculate the cost...

And the engineers of Xinghuo Technology, just operating their flexible processing robots, showed their skill of punching holes in iron bars in front of the engineers of SF.

Immediately conquered the engineers of SF.

Just for this item, let them know that this company is absolutely reliable!

The engineers stated that there is nothing wrong with the machine tool, and it is absolutely enough for us to use.

But the leader who led the team was not in a hurry to place an order for Spark Technology.

Because before he set off this time, he had received several waves of people, so he also came with a mission...

The genius remembers the address of this site in a second: Mobile version reading URL: