Chapter 219 Producing Forklifts

One afternoon, Luo Cheng felt that he was looking for trouble. The female workers couldn't understand the drawings, and their ability to accept them varied.

Fortunately, it is spare parts. Team Leader Jiang and the others have been looking at the drawings for many days. Now they have the drawings at home, and they can teach them. Luo Cheng called Team Leader Jiang and others to come over to teach. Four of them, including himself, were teaching the female workers.

If Team Leader Jiang and the others hadn't been called over, Luo Cheng would have taught them how to assemble each component once in the afternoon, and he might not have been able to finish the assembly himself.

There are not many opportunities for female workers to try their hands, because not many parts of each type are produced. Each person only has to memorize one part, and even if he just reads it once, he won’t be able to remember it well. But the accessories assembled by Luo Cheng and Team Leader Jiang can also be used as a reference. In fact, there are still things that I can’t understand based on the model. Let’s ask Team Leader Jiang to send another person to give guidance tomorrow.

Today, in addition to teaching the female workers to assemble spare parts, the other thing is grouping and numbering. Each component has its own number, and the spare parts produced next time will also be classified according to the number. Which number will be handed over to the numbering group for assembly.

So at the beginning, these female workers only need to remember how to install a component. When others come later, this initial batch of workers will teach the subsequent ones.

It was impossible not to leave early. Luo Cheng, who was driving a tricycle, left ten minutes before getting off work.

After returning home, Mr. Luo Cheng was still angry, but Luo Cheng stopped studying the drawings. Now there is no pressure to look at the drawings. It is still interesting to read famous novels, and it is more calming to look at the drawings after dinner.

"Luo Dalang, take medicine."

"No~~, let's make peace and leave me alone."

"If you don't have the strength to restrain a chicken, you can run anywhere."

~~~~

"Brother, it's time to eat."

Hearing the voice calling for dinner, Luo Cheng woke up suddenly. I went to read a novel and fell asleep. He found that he was actually a coward in his dream, and his intention was to kill someone. But his behavior is to beg for mercy out of fear, which is really frustrating.

When he got up and went to eat, the rice was already served. Looking at the dishes on the table, Luo Cheng couldn't help but ask why he was getting tired of eating cabbage or radish every day these days.

But Xiaoyu's reply was that there are no vegetables for sale this season, and now there are Chinese cabbage, and in a while every household will have to store Chinese cabbage.

Luo Cheng thought that Chinese cabbage was always stored in the Northeast, but he had never heard of Chinese cabbage being stored in the South.

In fact, in this era, the south also stored cabbage like the north, and also hid radishes and the like. In later generations, southerners did not feel this way because winter in the south was just not as cold as in the north, and the cycle was not as long. In the north, storage is about to begin at this time, and it usually takes two months to prepare vegetables. In the south, the preparation time is short, and the quantity is naturally small. It can be prepared half a month before the New Year.

There are still leaf vegetables for sale, but not many. Some uncles and aunts who don’t work queue up early in the morning and can’t get them at all. There are leafy vegetables in the factory cafeteria because they are ordered directly. After a while, the only vegetables in the cafeteria may be cabbage and radishes.

"There will be other vegetables in the cafeteria from now on. I will bring one or two portions here every day. I will eat the cabbage and radish later when there is really no other vegetables."

"Brother, how about I get up early tomorrow and queue up to buy groceries?"

"No, it's not much money, and the food cooked by the chefs in the cafeteria tastes good."

Buying a pound of vegetables, except for Chinese cabbage and radish, other leafy vegetables costs at least two or three cents. Buying a vegetarian dish in the canteen is just the price. But the vegetable soup in the canteen is watery, and one pound of vegetables can be sold for three servings. Of course, there is oil and salt in the dishes in the cafeteria.

Factory cafeterias rely on vegetables to make money. A kilogram of rice only earns you a penny. It doesn't cost you anything to help you cook a good meal for a penny.

When it comes to taste, if a rural girl can cook it as well as Xiaoyu, it’s considered good, but it can’t be said to be delicious. Others nodded involuntarily when they thought of the food in the cafeteria.

After the meal, Luo Cheng washed up and immediately went back to the room. There was a brazier in the room and the temperature was warmer than the living room. First I looked at the drawings and then the book. I have to say the charm of words. The description of the image of this person surnamed Pan makes people uncomfortable. Let Luo Cheng write it. If there is no such elegant writing, it might just be written by Xiao Huang~.

The next morning, Luo Cheng rarely got up a little early, but only a little. At least he was out of the room when Xiaoyu and the others were at work.

According to normal circumstances, all the engine drawings will be released today. Although the drawings are out, it still has to wait until the engine is produced. But at least the system was temporarily liberated. I haven't relied on the system to improve food for a long time. There is still a turtle in the system, and Luo Cheng doesn't want to deal with this yet.

When I went to the factory today, I found that construction had started on a new construction site. Such factory construction does not require design drawings at all, and no specific planning is required. The foundation is simply excavated in one place. There will be a wide space on the side, which can accommodate cars and trucks. Don't save land. Land is worthless now. If you want to expand, land will be given directly to you.

After saying hello to Section Chief Zhang, Luo Cheng went in, went straight to the research room, and got the drawings.

In the research room, Luo Cheng actually saw Gao Ru today. He hadn't seen her for a few days, and he seemed a little less green than before.

It was easy for her to go back to the car factory, and the balance ratio data of the forklift came out. This is not a difficult matter in the first place. If you understand it, it is very simple to calculate. If you don't understand it, you can only measure it slowly using objects in a rigid way.

However, the data given now is only for 2T motorized forklifts. According to Luo Cheng's request, she has to go to the school's scientific research room to continue calculating comparative data for other forklifts of various weights. If Luocheng produces forklifts with the same structure, it is impossible not to produce other types. Unless the horsepower is insufficient, the produced vehicle will not be able to pick up the desired data weight.

So what are you waiting for? Let's continue the meeting. Director Zhao happens to be here now and is responsible for the handover and placement. There are many senior sheet metal workers, forgers, and operators in military factories.

The forklift style designed by Luo Cheng is a later-generation body shape. At least the four corners are an integral body with arcs. It certainly couldn't be compared to a car, but this forklift had a thick body and no machine operation. Luo Cheng wanted to see if these senior workers could create the body shape he wanted.

During the meeting, Xu Haitang from the Propaganda Department continued to use the loudspeaker to inform the meeting that the automobile factory was about to launch another product. If this car was built, Luo Cheng didn't want to have to arrange every step by himself. It is best to hold meetings to directly discuss operations with each other. Who will be responsible for what at that time, and all departments will work together to quickly build the forklift.

While everyone was still preparing to come to the meeting, Luo Cheng simply drew the shape of a forklift on the blackboard in his office. Of course, there was a sketch of the shape before, and it was drawn on the blackboard to make it more intuitive for everyone.

All the people attending the meeting arrived quickly. It doesn’t matter whether they can contribute to their best efforts. It doesn’t matter if they say it doesn’t matter. In fact, every department has something to do with it. For example, the personnel department has to recruit people again, the logistics department is responsible for procurement, and the workshop department is responsible for sending a group of people to overcome the assembly task.

I work in a repair shop, so I don't take part in this job, but I still have things to arrange when I come here. For example, five trucks and two jeeps are coming soon. They need to complete the installation of shock absorbers and booster pumps. They don't care about other people's cars. The cars in their own factory must be made easy to drive.

Even if Luo Cheng came up with an engine, his first step would be to modify the Jeep, abandon the rocker-type car key to start, and directly use the key form to start it easily.

As for the truck, it cannot be modified for the time being. The engine horsepower does not match, so a high-horsepower one must be produced.

Luo Cheng asked various departments to circulate the drawings that Gao Ru brought back. While everyone was looking at them, he announced that the forklift would be produced soon.

The team leader of the operation workshop looks at which parts can be produced by his own factory, or what machines need to be added to produce them. Forks and the like can be produced directly from the steel rolling mill, where they can be produced. But the hydraulic structure, gears, wheels, etc. on the car can all be produced by a machinery factory, but a machinery factory is not a processing factory, so it still has to be produced reliably by itself.

Director Zhao is also looking at the data on the drawings, including the thickness of the board and the required styling angle. I was also thinking about how to build a semi-integral body, and after looking at it for a while, I figured out in my mind that the current stamping machine cannot achieve such strength for such a board. However, the manual calcining method can meet the requirements, but in this way, the production speed can be very slow. It would be easier if it was boxy, but the curve of the forklift in the drawing looks very pleasing to the eye, and some things have multiple purposes.

This shape may not seem very important, but good looks can often give people a good impression at first sight. It's worth the effort to export.