Chapter 175 Lack of Beautiful Female Models (Part 1)

In an instant, Guo Tailai was the first to discover another change in function through the control system.

The movement speed of nanorobots in the body has been increased once, it was increased by five times that time, and this time it has been improved again, it is still increased by ten times, and the overall speed is increased by fifty times. It can be said that as long as Guo Tailai gives instructions, Within a second, nanobots can reach any part of the body.

Leaving the body is just a simple instruction, but it actually includes many other contents, such as leaving the body from that position, in what shape, and so on.

Guo Tailai chose to start from the tip of the right index finger, and the shape is a line, because the line is the easiest to maintain in series. A second later, Guo Tailai saw that there seemed to be an extra fine hair on his finger.

In an instant, Guo Tailai could get the length of this fluff, which was exactly 5 mm. In addition, the diameter of the fluff can also be known, which is 0.15 microns, or in other words, it cannot be said to be a diameter, but a long square line, which is exactly the edge size of a nanorobot.

For a moment, Guo Tailai really wanted to touch this fluff, but finally realized that this fluff is just a single nano-robot connected end to end, and the rigidity may not be enough, and it might break if touched, so he held back.

But at the next moment, Guo Tailai immediately and decisively let more nanorobots leave the body, and combined with this long hair into a thin needle. With so many nanorobots connected, Guo Tailai couldn't see the seams at all, as if they were integrated into one.

The thin needles made of nano-robots in series look completely the same as ordinary needle tips, with a metallic luster and a certain strength, and you can feel pain when you pierce them. With more force, the thin needle easily pierced the other finger, and blood was seen.

With just one thought, an unknown number of nano-robots ran to the bleeding point to stop the bleeding. Guo Tailai also has a preliminary concept of this out-of-body function.

Isn't there another stimulus to strengthen cell function, Guo Tailai used it on the bleeding point by the way. Later, Guo Tailai saw a miraculous scene.

Under the observation of Guo Tailai, the small blood hole pierced by the fine needle quickly stopped the bleeding at a speed visible to the naked eye, and the outflowing blood cells were dragged back to the wound one by one by the nano-robots, and then the small wound disappeared in less than half a minute. It recovered as before, and there was no trace of being punctured anymore.

As for the pain, it disappeared long before hemostasis, directly simulating biological nerve currents, as if nothing had happened.

Powerful, with such a powerful function, it seems that it can be used not only on oneself, but also on other people because it can be separated from the body. Although it has not been tested yet, Guo Tailai already has stronger confidence in learning plastic surgery.

At first glance, the functions of cutting, welding and surface treatment for processing are not activated. Looking at the required materials, it seems that the laser cutting and welding functions should be realized on the size of nano-robots, which is amazing! Rubies are used for laser transmitters, and diamond powder should be surface abrasives. This thing can directly polish diamonds. More than 99.9999% of materials can be treated with diamonds.

Basically, all workpiece processing can be realized with these three most basic functions. Whether it is turning, milling, planing, grinding or manual processing, it is nothing more than cutting the workpiece into the most suitable shape. If the traces of welding are so subtle that they cannot be seen at all, and if the same material is used for welding, then the result of welding will be a seamless one, regardless of each other.

As for the surface treatment, it goes without saying that the 0.15-micron-level "craftsmen" are directly grinding with finer abrasives, which are more accurate than most high-precision grinding machines in the world, and the processing effect is outstanding.

With a thought, the thin needle was retracted into the body in a blink of an eye, without leaving any traces. Another thought popped up immediately. Guo Tailai wanted to change the shape, the thin needle immediately bent, folded, and extended according to Guo Tailai's thoughts, without the slightest pause, as obedient as possible.

Very good, Guo Tailai now knows some new functions. If the conditions are met and the functions of cutting, welding and surface treatment are activated, will small parts within 5 mm be completely cut by nano-robots without doing it yourself?

Sitting up, Guo Tailai brushed his teeth while opening the vision of the five nanorobots. During the process of brushing teeth, Guo Tailai suddenly thought, if the cutting function is realized, then daily oral care, that is, brushing teeth, can also be done by nano-robots?

In fact, in the last upgrade, the nano-robots had the function of detecting and killing microorganisms. As long as Guo Tailai could realize the function of crushing fine impurities in the body, then the only work of brushing teeth would be to rinse the mouth after cleaning the nano-robots. It is very convenient to think about it.

Guo Tailai was delighted when the five horizons were opened. Sure enough, the shooting clarity has been increased, at least Guo Tailai can see something clearly. The focal length is not very large, but Guo Tailai can clearly see some cells and tissue fluid from five fields of view, just like having five more microscope fields of view in his own field of view. Very good, so that there are some places in the body that can be visually inspected to check the situation.

Of course, this function sometimes requires Guo Tailai to have a strong psychological endurance, because the images in some places in the body are not so pleasing to the eye.

After finishing this, I looked at my watch, it was already afternoon. Guo Tailai said hello to his parents, and then went straight to the library of Shuimu University.

After careful inquiry for a long time, Guo Tailai was finally able to confirm that the new coordinates were indeed not in China, but in Myanmar, the second largest city in Myanmar, Mandalay.

This is troublesome, it's really a foreign country, and I don't know what the situation is there now, maybe I don't know when the next upgrade will be. Guo Tailai remembered that it seemed that he would not be able to go abroad within a year, and I am afraid that he really had to wait until then.

However, before upgrading again, Guo Tailai needs to solve several functions that have not been activated yet. Need industrial-grade rubies and diamonds in powder form, where can I find them?

Industrial-grade rubies and diamonds are basically synthetic. It meets a certain degree of purity and light transmittance, but it may not be more expensive than natural ones. Guo Tailai thought about it and decided to find Zhao Xiangbei.

"Uncle Zhao, help me get some synthetic rubies and diamonds." Guo Tailai called as soon as he got out of the library, without wasting any time.

"What do you want to synthesize rubies for?" Zhao Xiangbei was taken aback when he heard Guo Tailai's request, and his first reaction was lasers, so he hurriedly asked, "Do you want to make lasers?"

"No!" Guo Tailai denied without blushing, "It's fine to use scraps. The last time I gave my mom a watch, my dad didn't have anything, so I plan to make a pair of watches myself and give them to them."

"What about the diamond?" Zhao Xiangbei asked again.

"Inlaid on the dial!" Guo Tailai replied logically.