Chapter 543 Boss, You Are Crazy

Li Tianyu pondered for a while and decided to brag and give it a try.

It's not about chip manufacturing.

The foldable flexible screen has been done, and this can still be done.

Li Tianyu also deliberately checked some information, so as not to brag about it badly. After all, chip production is too professional, even better than LCD panel production.

In fact, chip production, professionally speaking, is wafer production.

The chip production line is the wafer production line.

Wafer refers to the silicon wafer used to make silicon semiconductor integrated circuits, and its raw material is silicon.

Of course, some domestic units are now vigorously researching carbon-based chips, and it seems that there is also a great prospect of technical mass production, but that is another set of technical systems.

Today's chips are developed on the basis of silicon wafers, so the production line must also use such technical standards.

In any case, let’s solve the problem of the lithography machine first. As many media say, without a lithography machine, chip manufacturing and so on, everything is in vain.

Li Tianyu pretended to blow a bull about the lithography machine, and then started the operating system as usual.

Open the system interface and enter the order center.

Interface display: list refresh...

To be honest, Li Tianyu was really nervous. He didn't know if the system could brush out the lithography machine.

It is not easy to buy lithography machines now. According to normal channels, Asmer lithography machines in the Netherlands cannot enter the country.

Of course, it is not only Asmar that can produce lithography machines in the world, but the technology is slightly behind.

But if Li Tianyu wants to buy it, he must buy the best one, there is no doubt about that.

After a while, the list finally refreshed.

Li Tianyu took a look, there are really a lot of good guys.

【Device Name】: Lithography all-in-one machine

[Equipment function]: silicon wafer chip manufacturing

【Operation Mode】: Manual

[Production accuracy]: up to 56 nanometers

[Manufacturer]: Belix [Deutsche]

[Amount of tax payment]: 250,000 yuan soft sister currency—€�

【Device Name】: Lithography all-in-one machine

[Equipment function]: silicon wafer chip manufacturing

【Operation mode】: Semi-automatic

[Production accuracy]: up to 28 nanometers

【Manufacturer】: Nikon [Japan and Country]

[Amount of tax payment]: 530,000 yuan soft sister currency—€�

【Device Name】: Lithography all-in-one machine

[Equipment function]: silicon wafer chip manufacturing

【Operation mode】: Fully automatic

[Production accuracy]: 28 nanometers

[Manufacturer]: Canon [Japan and Country]

[Amount of tax payment]: 680,000 yuan soft sister currency—€�

【Device Name】: Lithography all-in-one machine

[Equipment function]: silicon wafer chip manufacturing

【Operation mode】: Fully automatic

【Production accuracy】: 3 nanometers

【Manufacturer】: ASML [Netherlands]

[Amount of tax payment]: 725,000 yuan soft sister currency—€�

【Device Name】: Lithography all-in-one machine

[Equipment function]: silicon wafer chip manufacturing

【Operation mode】: Fully automatic

【Production accuracy】: 1 nanometer

【Manufacturer】: The mysterious X group company

[Amount of tax payment]: 988,000 yuan soft sister coins

There are five pieces of information on one page, and they are all filled.

Yes, all of them are lithography machines.

There are many types of lithography machines, only the silicon wafer chip manufacturing type is shown here.

This is also Li Tianyu's special request to Li Tianyu.

Li Tianyu carefully browsed the list of system orders. By convention, they are arranged from low-end to high-end from top to bottom.

Just like the rumors, the production countries of the lithography machine are Germany, Japan and the Netherlands, and the Netherlands.

There should be other countries, such as the United States of America, but it is not shown.

Either it needs to be refreshed, or maybe the share of lithography machines in those countries is too low, so it's not worth mentioning.

The ones produced in Germany are relatively low-end, and there are actually manual ones. Of course, the required taxes are also quite low, only more than 200,000 soft sister coins.

Japan and the country are relatively better later, there are semi-automatic and fully automatic ones, namely Nikon and Canon.

Both companies are giants in SLR cameras and optical equipment, and of course their attainments in lithography machines are not too low.

In fact, in the 1970s and 1980s, the angry lithography machines of the two companies in Japan and the country occupied an absolute dominant position in the world.

However, for some very complicated reasons, Asmer in the Netherlands was supported, and gradually left Canon and Nikon behind in the lithography machine business.

So now ASML's lithography machine should be the most advanced lithography machine in the world.

The latest ASML lithography machine can theoretically break through the technical limit of 3 nanometers.

On the other hand, Canon and Nikon can basically only stay at 28 nanometers, and there is no inch advance.

Of course, ASML's lithography machines will not be in stock. They are all produced after large companies place orders, and only a few can be produced in a year.

Small business looking to buy? That's really out of the question.

At present, domestic companies do not have access to the Netherlands' ASML lithography machine.

Li Tianyu couldn't help but smile when he saw ASML's lithography machine.

It seems that bragging about the tax payment system is indeed quite a craze. Impossible things are not a problem in front of the system.

Taxes and fees are indeed higher, reaching 720,000 soft sister coins.

However, to Li Tianyu, it was nothing at all.

But why didn't Li Tianyu choose, because there is the last item, which is the fifth item.

The physical manufacturing limit of this last lithography machine has actually reached 1 nanometer, which is higher than that of ASML's lithography machine!

You know, with the current level of chip manufacturing technology, when it reaches below 7 nanometers, every step is very difficult.

1 nanometer, according to the current level of technology, can't even think about it!

Which manufacturing company is so awesome? Actually produced a lithography machine that can make 1nm technology chips.

Li Tianyu was stunned when he saw it.

The mysterious X group, what kind of ghost company is this?

Li Tianyu remembered that he had seen this company in the system list before, when he wanted to get an improvement plan for a foldable flexible screen.

In any case, the tax amount was more than 990,000, which almost reached 1 million soft sister coins.

Since there are better options, then Asmer's lithography machine should stand aside.

It may also successfully avoid technological blockades abroad, especially in the United States.

What else are you talking about, hurry up and pay the taxes, so you don't have a lot of dreams at night.

【Tax payment information】

988,000 yuan soft sister coin –         Â

【Item Information】

Lithography all-in-one machine [Mysterious X Group Company] 鈖€銢墢]

Li Tianyu breathed a sigh of relief.

The most difficult lithography machine is finally done.

Although the mysterious X Group company is a bit like a copycat company, Li Tianyu also paid a tax of one million soft sister coins, presumably the system will not fool him with low-quality, low-quality things.

Then, Li Tianyu began to arrange other equipment.

In addition to the lithography machine, the etching machine is also a very important equipment, and the price is also quite high, often hundreds of millions of US dollars.

However, relatively speaking, the selectivity of the etching machine is more.

Li Tianyu took care of all the big things in one go.

It wasn't much, but it took almost an hour.

My energy is so bad, I can barely move when I lay on the sofa.

To be honest, Li Tianyu felt that the use of the system was quite energy-intensive.

Li Tianyu opened a can of beer, took a few gulps, suppressed his shock, and finally recovered a little.

At this time, Li Tianyu suddenly thought that when the machinery and equipment of the production line arrives, there is no place to put it.

To be precise, a new factory is needed to install the wafer chip production line.

This is no small matter, Li Tianyu immediately called Lu Hui.

Lu Hui seemed to be busy and did not answer the phone.

Li Tianyu didn't play any more, and just watched TV there.

After a while, Li Tianyu's cell phone rang. Sure enough, Lu Hui called back after seeing the missed call.

Lu Hui: "Boss, did you call me?"

Li Tianyu: "Yes, what are you doing, kid? Are you doing something serious?"

Lu Hui: "Boss, I'm just doing business. I was in a meeting just now."

Li Tianyu said "Oh": "By the way, I called me to ask you something."

Lu Hui: "What's the matter? You said."

Li Tianyu: "Is the new factory almost ready now?"

Lu Hui: "Where is Guanglan?"

Li Tianyu: "It's fine over there."

Right now, Lu Hui's construction is underway, and both Jiaxin and Guanglan Electronics are building new factories.

This is also normal. After all, the order volume of the two factories has increased sharply recently, and the benefits are very good.

Therefore, it is urgent to expand new factories and strengthen production lines to relieve production pressure.

Lu Hui: "Two of Guanglan's factories are about to be completed, and they are currently undergoing interior decoration."

Li Tianyu: "When will it be finished?"

Lu Hui was confused and didn't understand what Li Tianyu was going to do, but he still replied: "If it's fast, it can be completed next week."

Li Tianyu: "Reserving a factory, I plan to start a new production line."

Lu Hui was startled: "The new production line? Boss, what production line? Or the LCD panel production line?"

Li Tianyu: "Of course not, it's a silicon wafer chip production line."

Lu Hui didn't react for a while, and after several seconds, he let out a loud "ah".

Lu Hui: "Boss, you, are you crazy!?"

Li Tianyu: "You're crazy! No big or small."

Only then did Lu Hui suppress his restless emotions, calm down, and said, "I'm sorry, boss, I'm too excited, no, what are you saying is true or false?"

Li Tianyu: "Bullshit, of course it's true. This is a serious business. What am I telling you about?"

Lu Hui: "Chip production line?"

Li Tianyu: "Chip production line."

Lu Hui: "What, what specification? Boss, I, I mean to ask, how many nanometer chips can be produced?"

Li Tianyu: "Comrade Xiao Lu, do you think I will build some obsolete production lines? Even if you don't say anything, I think it will take up space."

Lu Hui: "Then you mean..."

Li Tianyu: "If you reach the limit, you can reach a 3-nanometer process."

Lu Hui remained silent for a while, longer than the previous time, as if he had passed out.

Li Tianyu: "Hey, Mr. Lu, are you still there? Isn't it another meeting?"

Lu Hui: "No, no, boss, when will the production line you mentioned...will arrive?"

Li Tianyu: "It should be very soon. Anyway, try your best to prepare the workshop next week, and be ready to receive machinery and equipment at any time."

Lu Hui: "Okay, boss, don't worry, I'll make the construction team work overtime. If it doesn't work, I'll pay more for overtime."

Now that the efficiency of the two factories is good, and the profit margin is maintained at a high enough level, Lu Hui is of course full of confidence. After all, there is real money in the group's financial accounts, which is more effective than anything.

Not to mention anything else, now the workers of the Didu Electronics Factory, as long as they have a little understanding of the market, all want to join Jiaxin Technology or Guanglan Electronics.

Why?

High salary, good benefits.

Li Tianyu: "This matter, don't let too many people know about it, just tell some core personnel a little bit about it."

Lu Hui understood that this matter was indeed of great importance, and immediately agreed.

The establishment of a wafer factory is a big event. If the rumors leak out without proper preparation, it may have a serious impact on future development.

Li Tianyu chatted with Lu Hui again, and then said goodbye and hung up the phone.

With everything under control, Li Tianyu finally put his mind at ease.

Next, wait for the machinery and equipment to be in place, install the silicon wafer chip production line, and then find a way to find a team of wafer chip experts, so that the construction can start smoothly.

By the way, only then did Li Tianyu remember the bet he made with Xia Lei.

At that time, you can talk to Xia Lei, invite him to the factory, let him see if this is a top-level silicon wafer chip production line.

As for the existence of the chip technology research and development team that Xia Lei said, Li Tianyu is not worried.

Xia Lei's connections and connections are still quite wide, and he is a big boss in this position, and under normal circumstances, he will never brag, or recklessly pour water when he speaks.

Because there are thousands of eyes staring at Xia Lei.

To speak some nonsense, it will affect his reputation and reputation.

And Xia Lei is actually happy for Li Tianyu to build a silicon wafer chip factory.

why?

Because Xia Lei is an investor, and he is a top investor in China. If there is a promising chip factory in front of him, can he not think about investing money?

So Xia Lei is inspiring Li Tianyu to make a big move. If Li Tianyu is really successful, then the R&D personnel, R&D team, etc., Xia Lei will definitely support it with all his strength.

Li Tianyu pondered that Xia Lei would definitely talk to him about cooperation.

For example, exchanging chip technology R&D talents for equity.

Will Li Tianyu accept such conditions?

Li Tianyu really had to think about it.

But not now, Li Tianyu felt a headache.

He hates going to work the most, but now he has to "work", which is really annoying.

Just when Li Tianyu was about to start drinking beer again, the phone rang again.

Li Tianyu reluctantly picked up the phone and looked at it.

What the hell!

Ai Heping called.